| Sign In | Join Free | My chinabagsnet.com |
|
Y-Width of Bottom Edge on Board : 4.75mm
Pins Structure : 1x2P
Reference Series : PH
Contact Plating : -
Contact Material : -;-
Operating Temperature : -25℃~+85℃
Flame Retardant Rating : -
Supplementary Features : -
Pitch : 2mm
Voltage Rating (Max) : 50V
Number of PINs Per Row : 2
Number of Rows : 1
X-Length of Bottom Edge on Board (Spacing Line) : 6mm
Row Spacing : -
Z-Height of the Board : 6mm
Mounting Type : 直插
Description : Connector Header 2 position 2mm Pitch Through Hole -25℃~+85℃
Mfr. Part # : PH-D-2A
Package : Through Hole,P=2mm
Model Number : PH-D-2A
The PH Series connectors are designed for wire-to-board applications. This specification covers the PH Series connectors, offering reliable electrical and mechanical performance for various industrial uses.
| Item | Requirement / Specification |
|---|---|
| Ratings | |
| Rated Voltage [AC(rms)/DC] | Not Specified |
| Rated Current | 2A |
| Ambient Temperature Range | -20 +85 |
| Performance - Electrical Performance | |
| Contact Resistance | ≤20m |
| Insulation Resistance | ≥100M |
| Dielectric Strength | 500V AC/minute |
| Performance - Mechanical Performance | |
| Male Contact Retention Force | ≥15 PER PIN |
| Female Contact Retention Force | ≥15 PER PIN |
| Plug-in Force | ≤0.5N PER PIN |
| Plug-out Force | ≥0.2N PER PIN |
| Performance - Environmental Performance and Others | |
| Repeated Insertion and Withdrawal (20 cycles) | Contact Resistance: 20 m MAX |
| Vibration Resistance (DC 1mA, Amplitude 1.5mm, Frequency 10-55-10Hz/min, Duration 2 hours in each X,Y,Z axes) | Appearance: No Damage Contact Resistance: 20 m MAX Discontinuity: 1 ms.MAX. |
| Shock Resistance (DC 1mA, 490m/s²{50G}, 3 strokes in each X,Y,Z axes) | Appearance: No Damage Discontinuity: 1 ms.MAX. |
| Heat Resistance (85±2, 96 hours) | Appearance: No Damage Contact Resistance: 30 m MAX |
| Cold Resistance (-40±2, 48 hours) | Appearance: No Damage Contact Resistance: 30m MAX |
| Solderability (Soldering Time: 2±0.5 sec, Soldering Temperature: 245±5, 0.2 mm from terminal tip) | Solder Wetting: 95% or more |
| Resistance to Soldering Heat (Soldering Time: 3±0.5 sec, Soldering Temperature: 260±5, 0.2 mm from terminal tip) | Appearance: No Damage, Deformation |
| Endurance (500 cycles at a speed of 15-18 cycles/min under rated current 1A) | Contact Resistance: 50m max |
|
|
wire to board connector DEALON PH D 2A featuring strong plug out force and high insulation resistance Images |